Category: Conductivity Meters

Conductivity Meters

  • Combined Conductivity Electrode and electronics.

    Conductivity Sensor System 2850

    Call for price

    Overview of Conductivity Sensor 2850

    The Signet 2850 Conductivity/Resistivity Sensor Electronics are available in various configurations  for maximum installation flexibility. The universal mount version is for pipe, wall, or tank mounting and enables single or dual (digital versions only) inputs using any standard Signet conductivity/resistivity sensor. The threaded j-box version can be used with these same Signet sensors for submersible sensor mounting. It is also available as a combined integral system configuration for in-line mounting and includes a conductivity electrode in a choice of 0.01, 0.1, 1.0,10.0 or 20.0 cm-1 cell constants. The 2850 is ideal for applications with a conductivity range of 0.055 to 400,000 μS or a resistivity range of 18.2 MΩ to 10 kΩ.

    All 2850 units are available with a digital (S3L) output, or  a single 4 to 20 mA. The digital (S3L) output version can be paired with the 9900 or 9950 Transmitter to extend the distance between the measuring points to 120 m (400 ft).

    The 8900 Multi-Parameter Controller allows for up to six 2850 (S3L) output conductivity sensors to be used with the Signet 8900 Multi-Parameter Controller. All 2850 units are built with NEMA 4X/IP65 enclosures which allow output wiring connections with long cable runs of up to 305 m (1,000 ft).

    The two-wire 4 to 20mA output version is available with eight 4 to 20 mA output ranges for each electrode cell constant. Each range can be inverted and is field selectable.

    EasyCal is a standard feature that automatically recognizes conductivity test solution values for simple field calibration. A certification tool is available for validation of the sensor electronics according to USP requirements.

    Conductivity Sensor system Features

    • Test certificate supplied with all sensors
    • Custom cell constant programmed into the electronics
    • Integral mount systems for quick and easy installation
    • Compact design for maximum installation flexibility
    • Extends the distance between the measuring point and the 9900 Transmitter to 120 m (400 ft)
    • Digital (S3L) interface or two-wire 4 to 20mA output
    • EasyCal with automatic test solution recognition
    • For use with ALL Signet conductivity electrodes
  • s-can Conductivity Sensor E-511-2-000 condulyser Profile image

    Conductivy Sensor – Condu::lyser

    Call for price

    Overview of Conductivity Sensor Condu-lyser

    The condu::lyser is a maintenance-free and long-term stable probe for online measurement of conductivity, automatically compensated with temperature. It can be mounted directly in the media or in a flow cell providing high precision by either conductive or inductive measurement. Thanks to the 4 electrode high measurement range it is ideal for all varieties of water. One sensor for all applications. 2 versions available one sensor with plug connector for use in monitoring or bypass stations, sensor with fixed cable for submersion directly into media.

    Conductivity sensor Features:
    • s::can plug & measure
    • measurement principle condu::lyser: 4 electrode contacting measurement
    • multi parameter sensor(temp and EC)
    • ideal for surface water, ground water, drinking water and waste water
    • steam sterilizable, autoclavable and compatible with Cleaning In Place (CIP)
    • condu::lyser monitors conductivity, temperature and salinity
    • long term stable and maintenance free in operation
    • high temperature, pressure and measuring range
    • factory pre-calibrated
    • mounting and measurement directly in the media (InSitu) or in a flow cell
    • operation via s::can terminals & s::can software
    • optional: automatic cleaning with compressed air
  • GF electronics Junction box Conductivity/Resistivity 2850

    Resistivity, Conductivity Electronics – 2850

    Call for price

    Resistivity or Conductivity Electronics Overview

    The GF Signet 2850 Conductivity/Resistivity Sensor Electronics are available in various configurations for maximum installation flexibility. The threaded j-box version can be used with these same GF Signet sensors for submersible sensor mounting.  Universal mount version used for pipe, wall, or tank mounting and enables single or dual (digital output only) inputs using any standard GF Signet conductivity / resistivity sensor. It is also available as a combined integral system configuration for in-line mounting and includes a conductivity electrode in a choice of 0.01, 0.1, 1.0, 10.0, or 20.0 cm-1 cell constants. The 2850 is ideal for applications with a conductivity range of 0.055 to 400,000 µS or a resistivity range of 100 MΩ to 10 kΩ. Each range can be inverted and are field selectable.

    All 2850 units are available with a choice of a single or dual digital (S3L) outputs, or a single 4 to 20 mA. The single digital (S3L) output version can be paired with the 9900 Transmitter to extend the distance between the measuring points to 120 m (400 ft).

    The 8900 Multi-Parameter Controller allows for up to six sensor inputs directly into the Georg Fischer  Signet  8900 Multi-Parameter Controller. All 2850 units are built with NEMA 4X/IP65 enclosures which allow output wiring connections with long cable runs of up to 305 m (1,000 ft).

    Resistivity or Conductivity Electronics Features

    • Accepts any cell constant
    • Compatible with all GF Signet  Conductivity Sensors
    • Output choices include digital (S3L) for use with the 4 to 20mA of GF Signet 8900, 9900, 9950
    • Compatible with GF Signet  Instrument Type 8900 or instruments accepting a 4 to 20mA output
    • Single or dual input available for remote mount version (S3L) only