Category: BOD Probes

Home -> Category: BOD Probes

BOD Probes

BOD Probes measure the amount of oxygen bacteria and other microorganisms consume to decompose organic matter in water, at a specific temperature. Higher BOD levels indicate more oxygen is required while low BOD means less oxygen is removed from water, so water is generally purer.

QUICK VIEW
Online Biological Oxygen Demand Analyser | BIO Series

Online Biological Oxygen Demand Analyser - Overview

These bio-electrode sensors (BES) allow you to reliably measure and monitor the changing BOD or VFA concentrations in wastewater. IT has a sensor biofilm which is customised to the following applications: wastewater collection networks, influent locations of wastewater treatment facilities, anaerobic selectors for biological nutrient removal, and anaerobic digestion environments. The sensors monitor biological oxidation of organic carbon in wastewater streams by measuring the rate at which in-situ and customised biofilm surfaces consume the available food. A biofilm is established on the sensor after 1-3 days in the wastewater stream. This bio-electric surface then uses the sensor current collector to generate a flow of electrons that is equivalent to the rate of organic carbon oxidation. This flow of electrons is measured and displayed on an online dashboard and updated every minute. Increasing BOD in wastewater will result in increased metabolic activity and sensor signal; acute chemical toxicity or significant dilution of BOD will result in low alert signals and reduce metabolic activity. This results in reliable, real-time insight into biological treatment rates and performance. These microbial, fuel cell-based sensors are robust and are used in the most challenging situations. Very little maintenance or cleaning is required. It highlights microbial activity variations, organic matter degradation, and process upsets, which can guide your operations.

Online Biological Oxygen Demand Analyser - Features
- Real-time monitoring of consumable BOD/VFA or rbCOD surrogate
- Plug-and-play functionality
- Multiple connectivity options (analogue, Ethernet, Wi-Fi)
- Smart Sampling Program reduces labour and analysis costs
- Low maintenance
Read more
QUICK VIEW
Organic Carbon Sensor | Carbo::lyser V3
Price range: R319,002.00 through R322,041.00
Organic Carbon Sensor - Overview

The Organic Carbon Sensor is ideal for the measurement of the organic carbon load, represented by parameters like UV254, TOC, DOC, COD, or BOD, and turbidity/solids concentration. Applicability ranges from drinking water to industrial wastewater. Pre-calibrations for different types of water and applications significantly facilitate use.

Organic Carbon Sensor - Features
- Monitors 3 of the following: TSS, Turbidity, TOC, DOC, BOD, COD, COD f, UV254, and UV254 f
- Measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
- Webserver onboard - IoT enabled, no user software is needed to configure
- Communicates directly with your mobile device via WLAN
- Choose the parameters you want to measure
- 8 GB onboard memory
- Improved optical performance - revolutionary precision
- Fast measurement interval - every 10 seconds
- Extremely power-efficient - sleep mode for low energy consumption
- Multiparameter probe with 1 mm, 5 mm, or 35 mm optical path length
- Long-term stability
- Virtually maintenance-free in operation
- Factory precalibrated, local multi-point calibration possible
- Automatic cleaning with compressed air or brush/ruck::sack
Drinkwater & Surface water Datasheet
Wastewater Datasheet

Select options
QUICK VIEW
Industrial Spectrometer Explosive Atmospheres | Spectro::lyser ATEX

Industrial Spectrometer Explosive Atmospheres - Overview

The spectro::lyser V3 Industrial ATEX offers multiparameter measurement of critical water quality parameters, such as COD, BOD and TSS, through leading-edge UV-VIS spectrometry technology. Designed for use in sewer networks and industrial wastewater treatment plants, this solution meets explosion-proof specifications according to RL 2014/34/EU and is certified by TUV to meet specific ATEX standards, providing safe operation in hazardous areas. Requiring virtually no maintenance, this power-efficient system can be used as a standalone or with data visualisation technology such as the io::tool to deliver long-term accuracy and stability, giving peace of mind that operations are safe, sustainable and meet compliance standards.

Industrial Spectrometer Explosive Atmospheres - Features
- Accurate Measurement - UV-Vis spectrometry across the full range (200-720 nm)
- RL 2014/34/EU - operation in hazardous environments. Meets specific ATEX standards for
- Reliable Operation - factory pre-calibrated
- Minimal maintenance
- Consistent Performance with automatic cleaning
- Versatile Installation. Can be mounted and measured directly in the media (in situ) or in a flow cell (monitoring station). It offers adaptability with various optical path lengths.
- Convenient Connectivity - equipped with a built-in web server and IoT-enabled capabilities
- No additional user software is required for probe configuration
- Customisable Parameter Selection with the option to include an unlimited number
- Highly power-efficient, featuring a sleep mode for low energy consumption
Read more
QUICK VIEW
Titanium Spectrometer | Spectro::lyser Titanium Pro

Titanium Spectrometer - Overview

This titanium spectrometer probe is a multi-parameter instrument that can measure multiple water quality parameters continuously. Its rugged design is suitable for use in high-pressure and high-temperature environments. As the probe comes into direct contact with the water, there is no need for complex sample pre-treatment. It is installed and operated by the easy "plug and measure" principle. The titanium spectrometer probes can be installed quickly and effortlessly, either submersed (InSitu) or in a flow-through setup (Bypass, monitoring station). It also comes with an automatic cleaning system that uses compressed air to clean the sensors. This system has proven highly efficient and reliable, even in untreated wastewater. The s::can spectrometer probes are intelligent instruments that use software-controlled procedures to identify any fouling on the measuring.

The titanium spectrometer monitors the following parameters depending on the applications selected: TSS, turbidity, NO3-N, COD, DOC, UV254, NO2-N, BOD, TOC, colour, O3, HS-, BTX, AOC, fingerprints, and spectral alarms, temperature, and pressure.

Titanium Spectrometer - Features
- UV-Vis spectrometry over the total range (190-720 nm)
- Ideal for industrial wastewater, desalination, and seawater
- Rugged design with titanium grade 2 housing
- Factory pre-calibrated, with advanced calibration service included
- Long-term stability
- Very low maintenance
- Automatic cleaning with compressed air or brush
- s::can plug & measure
- Mounting and measurement directly in media or in a flow cell
- Easy mounting without clogging
- Adaption of optical path lengths to 35 mm, 5 mm, 2 mm, or 0.5 mm possible
Datasheet Sea Water/Desalination

Datasheet Waste Water

Read more
QUICK VIEW
UV-VIS Spectrometer V2 | spectro::lyser

UV-Vis Spectrometer - Overview

The spectro::lyser™ measures the entire absorption spectrum and is used by many drinking water providers all over the world as a pivotal component in their raw water monitoring. The spectro::lyser™ can measure and analyse the absorption spectrum in its entirety with 256 different wavelengths, allowing detection of a multitude of organic substances. Depending on the application and individual selection it can measure: NO2-N, TSS (est), turbidity (est) NO3-N, COD, BOD, TOC, UV254, BTX, fingerprints and spectral alarms, temperature and pressure.

UV-VIS Spectrometer - Features
- s::can plug & measure
- measuring principle: UV-Vis spectrometry over the total range (200-750 nm or 200-390 nm)
- optical path lengths available to increase accuracy 100mm, 35mm, 5 mm, 2 mm, 1 mm or 0.5 mm possible
- multi-parameter probe with adjustable open path length
- ideal for surface water, groundwater, drinking water and wastewater
- long-term stability
- virtually maintenance-free in operation
- factory pre-calibrated, local multi-point calibration possible
- automatic cleaning with compressed air or brush/ruck::sack
- mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
- operation via s::can terminals & s::can software
- recommended by and compliant with public authorities and international agencies such as Chinese EPA, US EPA and CPCB
Read more
QUICK VIEW
Multilyser V3 | Multi::lyser

Multilyser V3 - Overview

The Multilyser is a combination of the s::can Nitrolyser and Carbolyser probes. The Multilyser measures organic carbon & nitrates for a multitude of pre-defined applications. The Multilyser is suitable to be used for surface water, groundwater, drinking water as well as wastewater applications. This accurate, easy-to-use probe optimises performance and cost-effectiveness. The Multilyser monitors 4 of the following parameters: Turbidity, TSS, TS, BOD, COD, TOC, DOC, COD f, NO3-N, NO-3, UV254, and UV254 f.

Multilyser V3 - Features
- UV-Vis spectrometry over the total range (190-750 nm)
- web server onboard – IoT enabled, no user software is needed to configure
- communicates directly with your mobile device via WLAN
- unlimited number of parameters possible
- 8 GB onboard memory
- improved optical performance
- revolutionary precision
- fast measurement interval – every 10 seconds
- extremely power efficient
- sleep mode for low energy consumption
- multiparameter probe with 1 mm, 5 mm, or 35 mm optical path length
- ideal for wastewater, surface water, and drinking water
- long-term stability
- virtually maintenance-free
- factory pre-calibrated, local multi-point calibration possible
- automatic cleaning with compressed air or brush/ruck::sack
Drinking Water Datasheet

Waste Water Datasheet

Read more
1
QUICK VIEW
Online Waste Water Monitoring Station | micro::station

Online Waste Water Monitoring Station - Overview

This modular micro::station combines s::can instruments into a compact and versatile system. It presents a complete solution, as the user only has to "plug & measure” in order to receive a variety of immediately available information and parameters at no extra cost. The s::can micro::station is designed for On-Line monitoring of water quality parameters in waste water. The required components - spectro::lyser, s::can probes and controller - are factory assembled with all the required flow cells, mounting fittings and pipes on a compact panel.

Online Waste Water Monitoring Station - Features
- Plug and play setup
- No reagents or titration system
- Minimal maintenance
- Event Detection
  - Event detection module
  - Online Validation
  - Spectral Alarm
- Online Measurement of Multiple Parameters
  - BOD, COD, BTX, TOC, DOC, UV254, NO3, NO2, NH4, K+, HS
  - PSU, TSS, FTU/NTU, Colour, pH, Redox, Conductivity, Temperature
  - O2, O3, H2S, AOC, Fingerprints, Alarms
Datasheet

Read more