Flow Meters

QUICK VIEW
Magmeter Flow Sensor | 2551
Price range: R32,897.00 through R89,766.00

Magmeter Flow Sensor - Overview

This insertion magnetic flow sensor features no moving parts. It is available in corrosion-resistant materials to provide long-term reliability with minimal maintenance costs. Material options include PP with stainless steel, PVDF with stainless steel, PVDF with Hastelloy-C, or PVDF with Titanium. These versatile, simple-to-install sensors deliver accurate flow measurements for a wide range of pipe sizes ranging from DN15 to DN900 (½ to 36 inches), making them suitable for various applications. These Magmeters offer frequency/digital (S3L) or 4 to 20 mA output options. Both are available on the blind and display versions. The frequency or digital (S3L) sensor output can be used with Georg Fischer's extensive line of flow instruments while the 4 to 20 mA output can be used for direct input to PLCs, chart recorders, etc. Both the 4 to 20 mA output and the digital (S3L) sensor interface are available for long-distance signal transmission. An additional benefit is the empty pipe detection which features a zero flow output when the sensors are not completely wetted. Also, the frequency output is bi-directional and can be set using the 4 to 20 mA output, using the display, or the 3-0250 USB to Digital (S3L) set-up tool. The display version is available with relays and features permanent and re-settable total values which can be seen on the display. The display contains multi-language options such as English, Spanish, German, French, Italian and Portuguese.

Magmeter Flow Sensor - Features
- Installs into pipe sizes: DN15 to DN900, 0.5 to 36 in
- Operating range: 0.05 to 10 m/s, 0.15 to 33 ft/s
- Max Pressure rating: PP 10.3 bar @ 25 °C, 150 psi @ 77 °F
- Power source: 4 to 20mA: 21.6 to 26.4 VDC, 22.1mA max
- Empty pipe detection
- Frequency output bi-directional
- Material options: PP with stainless steel, PVDF with stainless steel, PVDF with Hastelloy-C, or PVDF with Titanium
Select options
QUICK VIEW
Clamp-on Flow Sensors | MFATGx

Clamp-on Flow Sensors - Overview

This externally mounted sensor is for closed pipes and is non-invasive. This means low maintenance and cost-effective flow measurements using ultrasound. It can be used for temporary or permanent measurement. It can measure flow in both directions. The sensor can be attached by magnet, adhesive or stainless steel strap, and is easy to place. Also available with watertight or protective housing (optional).

Clamp-on Flow Sensors - Features
- Magnetic mount for temporary measurement
- Adhesive for permanent installations
- Adhesive and weather cover create a seal
- No gel erosion
- Easy installation
- Multi Pipe section – 1 RISONIC Clamp-On Controller can control up to 4 pipes
- Non-intrusive Ultrasonic flow measurement - No drilling in the pipe and no interruption of operation
- Cost-efficient
- Accurate measurement with 1 or 2 measuring paths
- Bi-Directional flow measurement
- Accuracy up to 1% of the measured value
- No configuration software is needed
- Easy configuration and remote diagnosis
- IEC 60870-5-104 and Modbus RTU/TCP communication
https://www.youtube.com/watch?v=soFZJWyA6A8&t=1s

Read more
QUICK VIEW
Insertion Vortex Flow Meter | LUGB-Insertion

Insertion Vortex Flow Meter - Overview

This insertion vortex flow meter measures the volume flow of non-conductive liquids, gases, and saturated and superheated steam. It has no moving parts, eliminating abrasion and wear. It is in a fully welded SS304 body (SS316 selectable). It has a patented sensor and flow sensor body and eliminates drift and vibration influence. It is highly accurate, especially for gas flow. It has a variety of signal outputs and selections such as 4-20mA, pulse with HART or pulse with RS485. When the temperature and pressure change significantly in gas flow measurement the vortex flow meter could add temperature and pressure compensation. The vortex flow meter could also work as a BTU meter and measure steam or hot water energy. Applications include the chemicals and petrochemical industries. Suitable for use with light oil or any purified water, such as thermal oils, desalinated water, demineralised water, RO water, boiler feed water, condensate water etc.

Insertion Vortex Flow Meter - Features
- Measured Medium: Liquid, Gas, Steam
- Accuracy: 1.0% (Flange), 1.5% (Insertion)
- Power Supply: 12-24V/DC or 3.6V battery powered
- Medium Temp: -40℃~+200℃; -40℃~+280℃; 40℃~+350℃
- Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa;6.4MPa (Other pressure can be customised)
Read more
QUICK VIEW
Modular Ultrasonic Flow Meter | RWTT Modular

Modular Ultrasonic Flow Meter - Overview

The Modular Ultrasonic Flow Meter is compact and economical. It works using the transmit-time working theory. One ultrasonic sensor sends an ultra-sound wave and another sensor receives this wave. The transmit time from send to receive has a direct relationship with the flow speed. The converter then calculates the flow speed based on the transmit time. Can be installed onto an instrument box easily via DIN rail. It has no pressure loss and measurement is not affected by temperature or pressure changes. Accuracy can reach ±1%. It has an LCD display and communicates via 4-20mA, pulse or RS485 outputs. It also has reliable empty full tube detection technology. Excellent low flow rate measurement performance. Turndown ratio 100:1.

Modular Ultrasonic Flow Meter - Features
- Accuracy: ±1% of reading at rates >0.2 mps
- Repeatability: 0.2%
- Principle: Transmit time
- Velocity: ±32m/s
- Pipe Size: DN15mm-DN6000mm
Read more
QUICK VIEW
Open Channel Radar Flowmeter | RWRadarFlow

Open Channel Radar Flowmeter - Overview

This radar flow meter is suitable for measuring water levels and flow velocity of open channels, rivers, reservoir gates, pipe networks of subterranean river courses and irrigation channels. This product can effectively monitor the change status of the water level, velocity and flow, to provide accurate flow information for the monitoring unit. It comes with a variety of communication interfaces. The radar flow measurement system is suitable for all-weather, automatic collection and real-time monitoring of open channel, natural river flow and water data.

Open Channel Radar Flowmeter - Features
- Velocity Measurement Range: 0.05 ～ 15m/s (Related to water flow)
- Velocity Measurement Accuracy: ±1% FS, ±2.5% of reading
- Transmitting Frequency: 24.000 ～ 24.250GHz
- Distance Accuracy: ±1cm
- Protection Degree： IP66
Read more
QUICK VIEW
Turbine Liquid Flow Meter | LWGY

Turbine Liquid Flow Meter- Overview

The Turbine Liquid Flow Meter is an economical flow meter which offers two accuracy classes, 0.5%R and 0.2%R. Its simple structure allows a small pressure loss and it has virtually no maintenance requirements. The Flange Type has two converter options: Compact Type (Direct Mount) and Remote Type. It is suitable for use with viscous fluids, non-conductive fluids, solvents, liquified gases and high-pressure applications. Applications include petrochemical and water industries. It operates reliably in both high and low flow rates and produces excellent repeatability as low as 0.05%.

Turbine Liquid Flow Meter - Features
- Digital Communication: MODBUS RS485; HART
- Power Supply: 24V DC/3.6V Lithium Battery
- Accuracy: ±0.5% (±0.2% Optional)
- Sensor Material: SS304 (SS316L Optional)
- Signal Output: Pulse, 4-20mA, (Alarm Optional)
Read more
QUICK VIEW
Ultrasonic Flow Sensor Heat Meter | GF U3000

Ultrasonic Flow Sensor Heat Meter - Overview

The U3000 provides various options for high-accuracy measurement for permanent ultrasonic Clamp-On flow metering. Options are available for high-accuracy measurement, power, communication, pipe dimension, data storage & export. It can be customised to almost any application need. The type U3000 V2 Heatmeter (HM) is an ultrasonic permanent clamp-on heatmeter / energy meter / BTU meter. Additionally, it is equipped with Pt100 temperature sensors to calculate the energy of a heat-exchanging system. The 'Clamp-On' concept allows for easy installation without process disruption. Compact, robust and reliable. Designed for long-term use in industrial applications. It can be used on PVDF, ABS, PVC, CPVC, PP, PE, PB-Instaflex, iron and steel pipes. Processes can be monitored directly by a higher-level system via 4 to 20 mA, Modbus, pulse or frequency output.

Ultrasonic Flow Sensor Heat Meter - Features
- Large, easy-to-read graphic display with backlighting
- Easy to install
- 'Clamp-On' design
- Datalogger option (up to 100 million data points)
- USB port for easy data export
- Analog, digital Modbus, pulse & alarm outputs
- Reynolds number correction
- Compatible with almost all pipe types
- Automatic energy calculation with two Pt100 temperature sensors (HM version)
Read more
QUICK VIEW
Coriolis Flow Meter | RWCMF

Coriolis Flow Meter - Overview

The Coriolis mass flow meter is designed according to the micro motion and Coriolis principle. It is a leading precision flow and density measurement solution offering the most accurate and repeatable mass flow measurement for virtually any process fluid. It has exceptionally low pressure drop. Coriolis flow meters are considered to be true mass flow meters because they tend to measure mass flow directly, while other flow meter techniques measure volume flow. Used with a batch controller, it can directly control the valve in two stages. Applications include: Petroleum, such as crude oil, coal slurry, lubricant and other fuels; high viscosity materials, such as asphalt, heavy oil and grease; suspended and solid particulate matter materials, such as cement slurry and lime slurry; easy-to-solidified materials, such as asphalt; accurate measurement of medium- and high-pressure gases, such as CNG oil and gas, and micro-flow measurements, such as fine chemical and pharmaceutical industries.

Coriolis Flow Meter - Features
- Flow accuracy: ±0.2% Optional ±0.1%
- Diameter: DN3~DN200mm
- Flow repeatability: ±0.1~0.2%
- Density measuring: 0.3~3.000g/cm3
- Density accuracy: ±0.002g/cm3
Read more
QUICK VIEW
Glass Tube Variable Area Flowmeters | DS3601-100mm

Glass Tube Variable Area Flowmeters - Overview

This Glass Tube Flowmeter uses a 100mm scale length borosilicate glass tube and a float. As it is based on the variable area (VA) principle, these flowmeters provide clear, simple and reliable operation. They are individually scaled and calibrated according to the customer's requirements. The fluid or gas flows vertically upwards through the tapered glass tube, causing the float to rise to an equilibrium position. The flow rate is measured by reading the top edge of the float against the scaled tube. Suitable for use with gasses or water (eg. cracked ammonia, helium, hydrogen, methane, nitrogen, oxygen, propane).

Glass Tube Variable Area Flowmeters - Features
- Instantaneous response
- Simple and reliable operation
- Low line pressure loss
- High resolution
- Custom scales available on request
Read more
QUICK VIEW
In-Line Pitot Tube | Platon DS1161

In-Line Pitot Tube - Overview

The In-Line Pitot Tube "Flo-bar" is a Stainless Steel pipe section with welded-in pitot probes. It is available for ½" to 2" pipes. They are supplied fitted with ¼" ball valves to provide process isolation. Suitable for liquids and gases.

In-Line Pitot Tube - Features
- Flow sensors for liquids or gases
- ±1% of the actual flow rate
- Flow averaging
- Internal isolation ball valve
- No power supply required
- Full electron beam welded construction
Read more
3
QUICK VIEW
Open Channel Flow Meter | RWPLCM

Open Channel Flow Meter - Overview

The Open Channel Flow Meter is an economical solution for open channel measuring. It measures level, flow rate and total volume of water flowing through weirs and flumes. The meter includes a non-contact ultrasonic level sensor to detect the water level which then calculates the flow rate and volume using the Manning equation and channel characteristics. Economical and reliable. The accuracy of change in level is 1mm. Suitable for a variety of weirs and flumes, Parshall flumes (ISO), V-Notch weirs, Rectangular weirs (With or Without End Contractions) and custom Formula-type weirs. The meter displays flow rate in L/S, M3/h or M3/min. It has a clear display with a backlit graphical LCD. The cable length between the probe and host is up to 1000m. The probe has a leak-proof structure and IP68 protection grade. It is chemically resistant for maximum application flexibility. Communications include a 4-20mA output and RS485 serial communication (MODBUS-RTU) output. It has 6 programmable relays for alarms. There are three buttons for programming or it can be remotely controlled for easy configuration and operation. The Open Channel Flow Meter is well suited for applications ranging from flow for water treatment plants, storm and sanitary sewer systems, effluent from water resource recovery, to industrial discharge and irrigation channels.

Open Channel Flow Meter - Features
- Power Supply: DC24V (±5%) 0.2A; AC220V (±20%) 0.1A ;Optional DC12V
- Display: Backlit LCD
- Flow Rate Range: 0.0000~99999L/S or m3/h
- The maximum of Accumulative Flow: 9999999.9 m3/h
- Accuracy of Change in Level: 1mm or 0.2% of full span (whichever is greater)
Read more
QUICK VIEW
Standard Vortex Flow Meter | QT LUGB

Standard Vortex Flow Meter - Overview

The Standard Vortex Flow Meter is robust and measures the flow volume of non-conductive liquids, gases, and saturated and superheated steam. The vortex flow meter can add temperature and pressure compensation. It has an embedded sensor, with 4 piezo-electric crystals encapsulated inside the sensor, which is patented. There are no moving parts, and no abrasion, and the non-wearing parts inside the vortex flow meter sensor are in a fully welded SS304 body (SS316 selectable). It eliminates drift & vibration influence well compared to other meters. It can also work as a BTU meter to measure steam or hot water energy. It has a wide range of applications.

Standard Vortex Flow Meter - Features
- Suitable Mediums: Liquid, Gas, Steam
- Medium Temp: -40℃~+200℃; -40℃~+250℃; 40℃~+350℃
- Accuracy: 1.0% (Flange), 1.5% (Insertion)
- Material: SS304 (Standard), SS316 (Optional)
- Nominal Pressure: 1.6MPa;2.5MPa;4.0MPa (Other pressure can be customised)
Read more
QUICK VIEW
Variable Area Vertical Pointer Flowmeter | RWLZ

Variable Area Vertical Pointer Flowmeter - Overview

The LZ series is a no-contact and zero-hysteresis variable area flowmeter. It is a high-precision, high-reliability signal transmitter. It detects changes in the angle of the magnetic field of the magnetic sensor. This high-performance flowmeter is available with an indicator or with LCD display and includes power failure protection. The LCD can display the instantaneous flow, total flow, loop current, environment temperature, damping time, and small signal removal. Optional Two-wire 4~20mA signal (with HART communication) output available. It is not affected by the medium’s physical and chemical states such as conductivity, dielectric constants, etc. The Variable Area Vertical Pointer Flowmeter is ideal for small and medium flow measurements of single-phase liquids or gas with small and medium pipe diameters. Suitable for use with mediums that are corrosive, toxic and explosive. Applications include chemical, pharmaceutical, petrochemical, food, and metallurgical industries.

Variable Area Vertical Pointer Flowmeter - Features
- Medium temperature: Normalised type -80℃~+220℃
- Ambient temperature: -40℃~+120℃ (Remote display without LCD≤85℃)
- Range ratio: 10:1 (Special type 20:1)
- Accuracy class: 2.5 (Special type 1.5% or 1.0%)
- Working pressure: DN15~DN50 PN16 (Special type 2.5MPa)
- Durable - fully welded stainless steel body
- Suitable for most mediums
- Easy-to-read displays
Read more
QUICK VIEW
Multi-Channel Ultrasonic Flow Meter | RWTT Multi-channel

Multi-Channel Ultrasonic Flow Meter - Overview

This flow meter is suitable for continuously measuring the flow and temperature of clean liquids that do not have a large concentration of suspended particles or gases in an industrial environment. It supports single-channel and multi-channel simultaneously. In the event that one channel loses signal, it can automatically switch to single-channel mode. This sensor solves the problem of any installation errors during the installation process. It has high measurement accuracy, good stability, and is easy to maintain. When combined with a temperature sensor it becomes a calorimeter which is widely used in process control and production measurement. Applications include water treatment, pharmaceutical, petrochemical, chemical monitoring, and metallurgical industries.

Multi-Channel Ultrasonic Flow Meter - Features
- High accuracy
- Supports single-channel and multi-channel simultaneously
- Good stability
- Easy maintenance
Read more
QUICK VIEW
Oval Gear Flow Meter | QTLC

Oval Gear Flow Meter - Overview

The Oval Gear Flow Meter is a positive displacement flow meter composed of a meter shell, oval gear rotor and converter. It is an instrument used for continuous or discontinuous metering and control of liquids in the pipeline. It has the advantages of the large metering range such as excellent accuracy, small pressure loss and high viscosity adaptability. It has good performance high-temperature and high-viscosity liquids. Applications include calibration and metering of crude oil, chemicals, food and bev, pharmaceutical, scientific research and military.

Oval Gear Flow Meter - Features
- Accuracy: ±0.2%; ±0.5%
- Nominal Diameter: DN8~DN200 mm
- Nominal Pressure: PN1.6~6.3MPa
- Medium Viscosity: 2~3000mPa•s
- Power Supply: 12V DC; 24V DC
- Excellent Repeatability
- Minimal Maintenance
- Suitable for water, oil and high viscosity fluids
- Easy Installation
- No Flow conditioning needed
- Good Turn Down Ratios
- Accuracy unaffected by changes in Viscosity
- No power required with pulse or mechanical register
- Robust Design
- Output options including: Pulse, 4-20mA, RS485
- Intrinsically Safe & Explosion Proof
Read more